ZAYON
arrow_backHome
keyActivation guide

Activate ZAYON,
pick the way that fits

ZAYON's performance, graphics and touch features need one special access: Root, Shizuku or ADB. Turn it on once with one of the methods below. The status in ZAYON (Pusat Aktivasi) changes to Penuh (Full) when it works.

Choose a method

developer_modeNo Developer options yet? Open hereexpand_more
  1. Open Settings → About phone. On Xiaomi/Redmi: About phone. On Samsung: About phone → Software information.
  2. Tap Build number (or MIUI / HyperOS / OS version) 7 times. Enter your PIN if asked, until “You are now a developer” appears.
  3. Go back to Settings → find Developer options. Usually under Additional settings / System. You can also search “developer” in Settings.
  4. Turn on USB debugging (for OTG and PC) or Wireless debugging (for Wireless). On Xiaomi, also turn on “USB debugging (Security settings)” if present.

wifiWireless debugging (Android 11+)

  1. Connect the phone to Wi-Fi. Home Wi-Fi or another phone's hotspot both work.
  2. In ZAYON: Pusat Aktivasi → Pairing Manual → Wireless. Choose how to enter the code: via notification or floating window, then tap Buka Wireless Debugging.
  3. In Settings, turn on Wireless debugging → pick “Pair device with pairing code”. On Indonesian phones it's “Sambungkan perangkat dengan kode penyambungan”. A 6-digit code appears.
  4. Type that 6-digit code into ZAYON's notification or floating window → Pasangkan. Keep the code screen in Settings open until it's done.
  5. Done: the status in Pusat Aktivasi turns Penuh.

infoGood to know

smartphone
NeedsAndroid 11 or newer and Wi-Fi. No PC, no cable.
restart_alt
After a restartTurn Wireless debugging on again, then open Pusat Aktivasi and tap Hubungkan. No new code needed.
help
If it failsMake sure the code screen is still open while you type, and the phone stays on the same Wi-Fi.

phone_androidPhone to activate (Target)

  1. Turn on USB debugging. See “Developer options” above.
  2. In ZAYON: Pusat Aktivasi → Pairing Manual → OTG → HP ini = Target. This phone has NO button: it just shows “Waiting for the Computer phone or PC…”. Keep this screen open until it's done.
  3. When the cable connects, choose “No data transfer” / “Charging only” in the USB notification.
  4. Allow the “Allow USB debugging?” dialog twice (tick Always allow). First for the friend's phone, when it taps Aktifkan. Second for ZAYON on this phone, a few seconds later. Then the status turns Penuh.

usbFriend's phone (the activator)

  1. Install ZAYON, then open Pusat Aktivasi → Pairing Manual → OTG → HP ini = Komputer. Called “Komputer” because this phone does the PC's job. No PC needed, and this phone needs no activation, only OTG support.
  2. Plug an OTG adapter into this phone, then connect the Target with a USB cable.
  3. Tap Pindai USB Device → approve the USB permission.
  4. Once the Target is found, tap Aktifkan. It shows “TCP/IP aktif di HP Target. Kabel boleh dicabut”. The friend's phone is done; wait for the Target to turn Penuh.
shopping_bag
NeedsOne other phone with ZAYON, an OTG adapter and a USB cable. No Wi-Fi or PC needed.
restart_alt
After a restartAccess is lost (an Android 10-and-below limit). Repeat these steps.

computerActivate from a PC

  1. Turn on USB debugging on the phone. See “Developer options” above.
  2. In ZAYON: Pusat Aktivasi → Pairing Manual → OTG → HP ini = Target. Keep this screen open on the phone.
  3. Plug the phone into the PC with a USB data cable. Close emulators (BlueStacks, LDPlayer, Nox) and phone manager apps on the PC.
  4. Open this page in Chrome or Edge on the PC, then click Connect phone. In the browser window click your phone's name → Connect. Then on the phone tap Allow on “Allow USB debugging?” (tick Always allow).
  5. Done. ZAYON on the phone connects by itself. If “Allow USB debugging?” appears once more (ZAYON's key), allow it too. You can unplug.

helpTroubleshooting

  • Phone doesn't appear in the list Make sure USB debugging is on and the cable carries data. Try another USB port. Some older phones need their own driver on the PC; if it still doesn't show, use phone-to-phone OTG.
  • “Phone is being used by another program” Close Android emulators and phone manager apps, unplug, plug back in, then click again.
  • The button doesn't work Use Chrome or Edge on a PC. Phone browsers and Firefox can't access USB yet.
  • Access is gone after a restart That's an Android 10-and-below limit: repeat these steps (or phone-to-phone OTG).

deployed_codeWith Shizuku

  1. Install the Shizuku app from Play Store. Open Shizuku on Play Store
  2. Open Shizuku and start its service. Android 11+: start it with Wireless debugging (follow the guide in Shizuku). Android 10 and below: needs a PC or root — the OTG / PC methods here are easier.
  3. In ZAYON: Pusat Aktivasi → Cepat → Akses Shizuku → Aktifkan.
  4. Choose Allow in the Shizuku pop-up. ZAYON's status turns Penuh.

infoGood to know

check_circle
Best forPeople already running Shizuku for other apps. One service is shared.
restart_alt
After a restartStart the Shizuku service again. ZAYON reconnects automatically.

tagWith Root

  1. Make sure the phone is rooted (Magisk, KernelSU or APatch).
  2. In ZAYON: Pusat Aktivasi → Cepat → Akses Root → Aktifkan.
  3. Choose Allow / Grant in the root manager pop-up. ZAYON's status turns Penuh.

infoGood to know

bolt
Most convenientStays active after restarts with no extra steps.
block
Don't root just for thisRooting can void warranty and make some games refuse to run. If your phone isn't rooted, use another method on this page.